EFFICIENT MICROELEMENTS
MICROSENSE® Maxi
Am Pösenberg 9-13
D-41517 Grevenbroich
Telefon: +49 2181 70 676 - 0
Fax: +49 2181 70 676 - 22
E-Mail senden
Excessive lime content in the soil increases soil pH and causes trace element deficiencies in annual and perennial plants. Foliar application of MICROSENSE® Maxi serves to easily absorb elements such as Fe, Zn, Mn, B, Mo and Cu, caused in high pH soils with lime content by the plants and to eliminate deficiencies. MICROSENSE® Maxi contains fulvic acids and amino acids. It is suitable for both soil and foliar applications,though more effective results are obtained in a very short time in foliar applications.
Excessive lime content in the soil increases soil pH and causes trace element deficiencies for annual and perennial plants. Foliar application of MICROSENSE® Maxi serves to smooth absorbtion of elements such as Fe, Zn, Mn, B, Mo and Cu, in high pH soils with lime content to eliminate deficiencies of plants. MICROSENSE® Maxii contains fulvic acids and amino acids along with microelements. It is suitable for both soil and foliar applications, though highly effective via foliar applications in short periods.
BENEFITS & RECOMMENDED APPLICATION
- More effective promptly with foliar applications in soil conditions where microelement intake is limited
- Provides easy diffusion of trace elements from the leaves to the plant
- Increases nutrient uptake efficiency through foliar applications
- Increases the plant resist to biotic and abiotic stress
- Eliminates yield loss due to trace element deficiency
- Effective results are obtained in a very short time
FIELDS OF APPLICATION
- Open field and Greenhouse
- Agriculture
- Vegetable Production
- Fruit Production
- Substrate Cultivation
- Turf and Landscaping
RECOMMENDED APPLICATION RATES *
Soil
Total amount/vegetation period 3 L / Ha (0.5 – 1.0 L / Ha per application)
Foliar
Total amount/vegetation period 1 L / Ha (0.3 – 0.5 L / Ha per application)
Substrates
0.20 – 0.30 L / m3
Hydroponics
20 – 40 ml / 1.000 L nutrient solution during cultivation cycle
* Standard recommendations that can vary according to soil properties, cultivated crop and local application conditions.
SHAKE WELL BEFORE USE
Please remind to shake well the bottle or container prepared mix well before use.
BLEND USE NOTICE
Before use in combination with other agents, first preparation of a sample mix in a small scale is recommended to avoid any risk of flocculation.
PREPARATION OF MIXTURE
Make sure sufficient amount of solution is added to half water filled tank while agitator is running. Add additional substances or crop protection agents before filling the tank fully with water.
INHERENT COMPOSITION (Typical values based on Fresh Matter)
Fulvic Acid | 3 % |
Total Amino Acid | 7 % |
Azosiprillum Brasselience | 1x107 |
Azotobacter Chrococcum | 1x107 |
Nitrogen (N) | 2 % |
Boron (B) | 1 % |
Calcium (Ca) | 1.5 % |
Copper (Cu) | 1 % |
Iron (Fe) | 2 % |
Magnesium (Mg) | 1 % |
Molybdenum (Mo) | 0.5 % |
Zinc (Zn) | 2 % |
pH | 4 - 5 |
Density | 1.3 g/cm3 |
* Humintech keeps the right to change the composition of the product.
CONDITIONS FOR SAFE HANDLING AND STORAGE
Store in a dry area, protected from frost, heat and direct sunlight.
KEEP OUT OF THE REACH OF CHILDREN, PETS AND FOOD.
DELIVERY SPECS
Bottle
1 L
Canister
5 / 10 L
IBC
Container
* This is general product information that should not be used as a basis for regulatory application.
HUMINTECH GmbH
Humintech is a biotech company based in Grevenbroich, Germany. We are primarily focused on the research, development and industrial production of humic matter and humic acids for the agricultural sector. Our products find further use in pharmaceutical, construction industry, for ecological purposes such as water purification and soil decontamination.
News
Contact
Humintech GmbH
Am Pösenberg 9-13
41517 Grevenbroich / Deutschland
Phone: +49 2181 70 676 - 0
Fax: +49 2181 70 676 - 22
E-Mail
